Get Data

1-Nokia 111 is not getting power on with battery.
2-Nokia 111 is dead and not getting power on with battery.
3-But it can be switch on with direct power supply of 4v.Nokia 2323 Classic Auto Restart On Off Problem Solution


Tools:-
To solve this problem you should have
1-Any electronics cleaner.
2-Hot Air Machine.
3-Solding Iron.
4-And same mother board if a few components required.
Solution:-
1-Check Nokia 111 with new battery and try to switch on.
2-If it can not be power on with battery then check with Power Supply.
3-Disassamble Nokia 111 and look at mother board very carefully.
4-If there is some rust or carbon on board then clean it with electronics cleaner.
5-Apply hot air with Hot air gun. Here should not be much heat because it can harm you and Mobile
Phone.
6-Check Mobile phone with battery if it can be power on with it.
7-If not working with above process then change these parts as shown in above diagram.
Warnings:-
1-Do not apply to much heat it can be harm for your skin and mobile.
2-Do not apply to much cleaner it can be cause of rust or carbon if you do not make your phone dry.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

if you are facing contact service in Nokia 1280 and its lcd light is also not working.this problem can be solved in a few simple steps as given bellow in diagram.Nokia 2330 Classic speaker ear piece problem solution jumper ways


So if you have diagnostic both two conditions in Nokia 1280 at the same time you can apply jumpers and make it possible to solve Contact service solution in Nokia 1280.
if these jumpers will not work you can remove lcd display and apply a new one to fix this problem with jumpers.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

This solution covers and may possibly help solved Nokia X6 Ringer and and Hands free loud speaker No sounds can be heard. You may need to ensure that the loud speakers is working well before applying this solution.





In Nokia X6 the handsfree speaker came with two channel the left and the right channel or so called stereo type. The audio signal is feeds from the power and audio chip (AVILMAS) and feeds to a audio amplifier IC to boost and amplify the sounds intensity.
You may need to check, trace, replace and rework those corresponding components indicated on the solution picture above.

Heres a complete line tracks of Nokia N78 charging circuit that may help fix and repair Not charging issues such as Charger No Response and Fake Charging.

The solution below shows the corresponding components that needs for check up and replacement if found damaged.


When a charger is being plug-in but there is no indication shows on the LCD screen Display. The problem may lies on an open chip fuse or a shorted diode. see picture above..
But ensure first that the charging pin connector is perfectly clean and not damaged before trying to check or replace the above showed mounted components.
IF the chip fuse, filter coils, chip diodes and capacitors is okay the problem may possibly lies on the Charging IC (BETTY IC). Try to reflow/rehea and rework before replacing it. A faulty Charging IC may also result to a fake charging, it means that it  shows a charging indication on the LCD screen display but the battery does not charge up at all.

Heres the solution for NOkia 3500 classic No Hand Free Speaker sound can be heard repair solution. If you ever tried checking and ensuring that loud speaker seem working but still there is no audio sound can be heard on the device when hands free is activated. This solution shows particular PCB board components that may possibly faulty or damaged and cause the Nokia 3500 not have an audio sound output over the speaker.




Ensure the speaker is working, replace if the sound is distorted.
Check the connected filter coils on the circuit, replace if found damaged.
Trace the line paths, mend a jumper wire if found open circuit.
If the line paths and the filter coils are okay, rework the audio IC (RETU). Replace if does not solved the problem.

if having tried to fix Nokia X6 Earpiece Speaker Problem that No Audio sound output can be heard and you already check  speaker is okay and also already  tried replacing the Flex cable wire but he problem unsolved. This solution might possibly help to solved the problem.



If the earpiece speaker and flex cable wire is working okay, those particular components highlighted on the solution might causes the problem if the device is severely damaged by any means of liquid or water damaged. Start to check on the flex pin connector and way down toall corresponding components composed of filter coil and bypass ESD resistor, replace at once if found open or shorted. If the filter coils were okay you may need to rework the power and audio IC (AVILMAS) trace the line paths first while the IC is being removed, then reball the IC, clean the solder balls surface and inplaced it back again.

Nokia 105 Speker ok but no ringer working noika 105 not ring tone, ic ring 105, nokia 105 no ringer, nokia 105 tone ic solution, nokia105 ear ok but not ringing, nokia 105 not ringing solution, nokia 105 ringer i c jumper, ringing nokia 105 with out ic jumper nokia 105 ringer ic jumper , 105 no ringtone , nokia 105 no tones ,Nokia Asha 200 Keypad Not Working Ic Jumper Problem Solution.

nokia 105 not ringing , nokia105 no ringtons , 105 no ring , nokia 105 not ring , jalur dering 105, 105 ringer ic, 105 buzzer problem, nokia 105 ear ok ringer not worke, Solution for nokia 105 not ringing , nokia 105 ringar ic jampar, nokia 105 ringer solution,