Showing posts with label problem. Show all posts
Showing posts with label problem. Show all posts
Monday, April 20, 2015
Nokia C2 03 Mic Problem Solution Jumper Ways Microphon
Tools:-
Nokia T5 and T4 for disassemble.
Universal Microphone.
Electronics Cleaner.
Hot Air.
Electronics Meter.
Solding iron.
Diagnostics & Solutions:-
Before Disassemble of Nokia C2-03 make sure that mic whole in Cassing ( housing ) is opened. And here is not any dust in it. Disassemble the mobile phone and remove mic microphone from mother board with solding iron.
Check points on mother board with miter and if any value is missing check all these parts that are given in red and blue color in above diagram.If any of them is missing apply jumpers as described in above repairing picture.
Replace new mic and apply jumpers to its negative and positive points. On the mother board Red color line shows ground print and Blue line indicates positive print of mic. So this will help you to solve mic problem in nokia C2-03
Warnings:-
Apply solder on mic and Remove mic when it too hot so that mic print remain OK.
Don’t apply much heat with hot air it can damage the mother board.
Assemble with focus because if mic is not in its proper place voice will not reach to destination mobile. Or you will not be able to record voice in it.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Sunday, April 19, 2015
Nokia N78 White Blue Black and Blank Screen Display problem solution
This repair solution below may possibly help fix and repair a damaged Nokia N78 displays like white screen, blues screen, garbled, blank or black screen and some related display problems and failure.

Repair Hints: There are two Display filtering chips used in the circuit, if already tried and replaced those both filter IC you may then also rework or replace the Display IC marked with number 3.
N78 Display problem solution

N78 Display IC jumper ways solution
Repair Hints: There are two Display filtering chips used in the circuit, if already tried and replaced those both filter IC you may then also rework or replace the Display IC marked with number 3.
Saturday, April 18, 2015
Nokia Asha 202 MMC Memory card problem solution
Nokia Asha 202 MMC Problem, Nokia Asha 202 Memory Card Solution, Memory Card Not formatted, Memory Card Not detected problem solution in Nokia Asha 202. All these memory card problem solutions are possible by following diagrams that I am going to post in this post.
nokia C5-03 USB not charging Not detect problem solution jumpers

Replace memory card and check it again. If card is not formatted make it format with card settings from Nokia Asha 202 or format the memory card with computer.
After dis assembly of nokia asha 202 check the whole mother borad for water damages or carbon on it. If you find it clean mother board with electronics cleaner and apply hot air to make it dry.
Do not apply much heat it can damage the nokia sha 202 mother board or may can harm your skin also. Check red line Ic that is used for memory card function in Nokia Asha 202. Re sold it and re flow the IC. If resolding of the memory card IC can not solve MMC problem you have to replace thic MMC Ic in nokia asha 202.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
nokia C5-03 USB not charging Not detect problem solution jumpers
Replace memory card and check it again. If card is not formatted make it format with card settings from Nokia Asha 202 or format the memory card with computer.
After dis assembly of nokia asha 202 check the whole mother borad for water damages or carbon on it. If you find it clean mother board with electronics cleaner and apply hot air to make it dry.
Do not apply much heat it can damage the nokia sha 202 mother board or may can harm your skin also. Check red line Ic that is used for memory card function in Nokia Asha 202. Re sold it and re flow the IC. If resolding of the memory card IC can not solve MMC problem you have to replace thic MMC Ic in nokia asha 202.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
nokia 101 insert sim problem jumper solution
To solve nokia 101 insert sim problem jumper solution this post will help you very much. This diagram will teach you how simply and easily you can sol insert sim problem in nokia 101.Nokia Asha 311 Not Charging Problem Solution Jumper Ways

same as jumpers are given in above diagram you can apply on the mother board and you can solve insert sim problem in nokia 101 with a few jumpers.
all jumper point are given in different colors so tat you can identify them easlily.
same as jumpers are given in above diagram you can apply on the mother board and you can solve insert sim problem in nokia 101 with a few jumpers.
all jumper point are given in different colors so tat you can identify them easlily.
Friday, April 17, 2015
Nokia Asha 202 No Network Low Signal Problem Solution Jumpers
If nokia asha 202 drop call or do not make voice calls it can be fault of signals and not network access. Check if your mobile phone is in offline mode airo plan mode. And also check your mobile phone’s setting about network selection it is automatic or manual.
nokia c1-01 light problem solution jumpers Tested 100%

Replace the sim card and cehck it again. If all these tips can not work then dis assemble the nokia asha 202.Find out if there is carbon or water damages on the mother board. Clean the whole nokia asha 202 mother board and apply heat to make it dry with hot air.
Do not apply much heat it can damage the mother board or can burn components.In above diagram red line is networking track. All these components are used in signal function of nokia asha 202.
Check these path with meter and if any of them is missing apply jumpers as given in repairing diagram of nokia asha 202. This can be use for nokia asha 202 signal not network solution.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
nokia c1-01 light problem solution jumpers Tested 100%
Replace the sim card and cehck it again. If all these tips can not work then dis assemble the nokia asha 202.Find out if there is carbon or water damages on the mother board. Clean the whole nokia asha 202 mother board and apply heat to make it dry with hot air.
Do not apply much heat it can damage the mother board or can burn components.In above diagram red line is networking track. All these components are used in signal function of nokia asha 202.
Check these path with meter and if any of them is missing apply jumpers as given in repairing diagram of nokia asha 202. This can be use for nokia asha 202 signal not network solution.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia 5700 White screen and Blue Screen Display Problem Solutions
If having tried to repair Nokia 5700 display problem issues and you installed a new LCD display module replacement on it but the problem still exists, This solution may help fix and repair Nokia 57000 display problem issues like white screen, blue screen, blank screen, garbled screen and other related display problem that is not caused by the LCD display module.

Nokia 5700 Display Problem solution

( white screen, blue screen and blank screen display repair)
There are two ESD-EMD filter is connected in the display circuits, If these ESD filter has been damaged it will result to display problem issues. Replacing it will possibly solved the display problem issues like white screen, blue screen, blank screen, garbled and saturated screen displays. Thursday, April 16, 2015
Nokia 5250 MIC Jumper Ways Problem Solution
nokia Asha 200 Camera Problem Solution Jumper Ways
Just follow a few simple tips on how we the microphone problem on Nokia phones Nokia 5250 to solve.
Nokia 5250 mic microphone problem can be solve with a few steps that i am going to write here if you are facing no mic voice is going forward or low voice goes to destination then you can check mic replace mic with new one.
there are two main colors in this diagram red and blue as you can see easily so these two lines are defining main path of links check these links and if any of them is broken then make these jumpers as define in diagram attached with this post.if any component is damage you can replace it also with same value parts.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
Nokia 2320 Classic Ringer Problem Jumper Ways Solution
So in first step you can replace ringer and if replacement of ringer will not work you can check all these tracks that are given in above diagram.
So if any of them is missing you can apply that jumpers and if any parts out of them are broken or damage you can replace them.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia C2 07 Camera Standby Notworkin Problem Solution Jumper Ways
Nokia C2-07 Camera Problem, Nokia C2-07 Camera Standby Mode can be cause of water damage or breakage. To solve this problem in the mobile phone you can follow a few steps that i am going to describe in this post.
Nokia 5233 memory card corrupted MMC problem solution

In first step restore factory setting in Nokia C2-07. Then make a full flash (software firmware) installation. And the third step is to check hardware diagnostic. After dis assembly of phone check the whole mother board carefully.If there is some rust or carbon on board then clean it with electronics cleaner and apply some heat with hot air. So that the mother board can be dry.
If mother board can not be full dry it can create carbon in future so keep in mind it should be dry.Do not apply much heat as it can harm your skin and mother board of cell phone.
In above diagram as you can see there are different color lines. These lines are indicating tracks that are used in camera function so check these paths and apply jumpers as shown in above diagram.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia 5233 memory card corrupted MMC problem solution
In first step restore factory setting in Nokia C2-07. Then make a full flash (software firmware) installation. And the third step is to check hardware diagnostic. After dis assembly of phone check the whole mother board carefully.If there is some rust or carbon on board then clean it with electronics cleaner and apply some heat with hot air. So that the mother board can be dry.
If mother board can not be full dry it can create carbon in future so keep in mind it should be dry.Do not apply much heat as it can harm your skin and mother board of cell phone.
In above diagram as you can see there are different color lines. These lines are indicating tracks that are used in camera function so check these paths and apply jumpers as shown in above diagram.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Wednesday, April 15, 2015
Nokia X2 05 Mic problem solution jumper ways
If mic is not working in Nokia X2-05. Microphone solution with jumpers, Low voice of Nokia X2-05 mic problem solution, Nokia X2-02 mic jumpers to make it solve.Nokia X2-05 Speaker problem solution jumper ways

If mic is not working or have a low voice it can be fault of mic and housing. Check Nokia X2-05 housing ( body ). All housing have a small whole at the point of mic. In some cases rust or dust cover this point and the voice can not reach proper to the mic point so make it clean if there is some dust on it.
After disassambly of Nokia X2-05 look at the motherboard for rust carbon or burren parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.
Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.
Remove mic and check all these tracks that are provided in above diagram to solve mic problem in Nokia X2-05. In diagram two different color lines are given to identify all parts that are used to solve Nokia X2-05 mic problem with jumpers.
If some parts are missing or damage apply jumper on these points where small circles are pointing in nokia mic repairing diagram above.
If mic is not working or have a low voice it can be fault of mic and housing. Check Nokia X2-05 housing ( body ). All housing have a small whole at the point of mic. In some cases rust or dust cover this point and the voice can not reach proper to the mic point so make it clean if there is some dust on it.
After disassambly of Nokia X2-05 look at the motherboard for rust carbon or burren parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.
Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.
Remove mic and check all these tracks that are provided in above diagram to solve mic problem in Nokia X2-05. In diagram two different color lines are given to identify all parts that are used to solve Nokia X2-05 mic problem with jumpers.
If some parts are missing or damage apply jumper on these points where small circles are pointing in nokia mic repairing diagram above.
Nokia 111 No Power On with Battery Problem Solution
1-Nokia 111 is not getting power on with battery.
2-Nokia 111 is dead and not getting power on with battery.
3-But it can be switch on with direct power supply of 4v.Nokia 2323 Classic Auto Restart On Off Problem Solution

Tools:-
To solve this problem you should have
1-Any electronics cleaner.
2-Hot Air Machine.
3-Solding Iron.
4-And same mother board if a few components required.
Solution:-
1-Check Nokia 111 with new battery and try to switch on.
2-If it can not be power on with battery then check with Power Supply.
3-Disassamble Nokia 111 and look at mother board very carefully.
4-If there is some rust or carbon on board then clean it with electronics cleaner.
5-Apply hot air with Hot air gun. Here should not be much heat because it can harm you and Mobile
Phone.
6-Check Mobile phone with battery if it can be power on with it.
7-If not working with above process then change these parts as shown in above diagram.
Warnings:-
1-Do not apply to much heat it can be harm for your skin and mobile.
2-Do not apply to much cleaner it can be cause of rust or carbon if you do not make your phone dry.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
2-Nokia 111 is dead and not getting power on with battery.
3-But it can be switch on with direct power supply of 4v.Nokia 2323 Classic Auto Restart On Off Problem Solution
Tools:-
To solve this problem you should have
1-Any electronics cleaner.
2-Hot Air Machine.
3-Solding Iron.
4-And same mother board if a few components required.
Solution:-
1-Check Nokia 111 with new battery and try to switch on.
2-If it can not be power on with battery then check with Power Supply.
3-Disassamble Nokia 111 and look at mother board very carefully.
4-If there is some rust or carbon on board then clean it with electronics cleaner.
5-Apply hot air with Hot air gun. Here should not be much heat because it can harm you and Mobile
Phone.
6-Check Mobile phone with battery if it can be power on with it.
7-If not working with above process then change these parts as shown in above diagram.
Warnings:-
1-Do not apply to much heat it can be harm for your skin and mobile.
2-Do not apply to much cleaner it can be cause of rust or carbon if you do not make your phone dry.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia E52 Lcd display Solution White Blank Display Problem Jumpers
Nokia E52 Lcd problem solution, Nokia E52 Lcd White display, Nokia E52 blank display. All these problems can be solve by following a few steps that I am going to describe here in this Solution of Nokia E52.Look at diagram bellow.nokia Asha 202 light problem solution with jumpers

In above diagram you can see some red lines these lines are given to identify components that are used in Nokia E52 display and lcd functions.After dis assembly of Nokia E52 replace lcd panel with new on and check it may can be the fault of lcd.
If replacement of lcd can not solve the display problem in Nokia C5.You can clean mother board and specially these parts that are inline with red color. Because there may can be some rust carbon or water damages.
Dry the mother board with hot air.And re sold or re flow these parts that can solve Nokia E52 display problem. Nokia E52 display solution is also possible with replacement of these parts.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
In above diagram you can see some red lines these lines are given to identify components that are used in Nokia E52 display and lcd functions.After dis assembly of Nokia E52 replace lcd panel with new on and check it may can be the fault of lcd.
If replacement of lcd can not solve the display problem in Nokia C5.You can clean mother board and specially these parts that are inline with red color. Because there may can be some rust carbon or water damages.
Dry the mother board with hot air.And re sold or re flow these parts that can solve Nokia E52 display problem. Nokia E52 display solution is also possible with replacement of these parts.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia 2320 Classic Mic Problem Solution Jumper Ways
You can replace mic also with this diagram and following to its tracks you can fix microphone problem in Nokia 2320 Classic.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia E52 Handfree IC Not working headset problem solution
If you find a handfree problem in Nokia E52. Hand free open Handfree not detected problem it can be solve with a few easy steps that i will write in this post. A headset repairing diagram is also attached with this post that will show you the main parts that are used in headset function in Nokia E52.Nokia C5-06 Display Problem Lcd Solution Jumpers

So once you have review the repairing diagram for Nokia E52 clean headset jack and these parts that are identified in above diagram. Clean them with electronics cleaner and apply heat to dry the mother board.Do not apply much hot air because it can harm you skin and may can damage the mother board.
Remove the ic and apply jumpers as shown in section one of the diagram Then change the second part which is given in repairing diagram for handsfree problem in Nokia c5-00.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
So once you have review the repairing diagram for Nokia E52 clean headset jack and these parts that are identified in above diagram. Clean them with electronics cleaner and apply heat to dry the mother board.Do not apply much hot air because it can harm you skin and may can damage the mother board.
Remove the ic and apply jumpers as shown in section one of the diagram Then change the second part which is given in repairing diagram for handsfree problem in Nokia c5-00.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Tuesday, April 14, 2015
IPhone 4 error 2 problem solved 100 tested solution
I Phone 4 error 2 problem solved 100% tested solution if u have i phone 4 and u try this update this phone and set 50% update and display show only error 2 not update phone for this phone i have this problem 100% tested hardware solution see my solution many time tested me this solution try this
i done i phone 4 error 2 100% working repair solution here
GPGDragon Ver 3.37C Boom Boom Update many phone supported this version see and enjoy it.

work 100% done phone for error solution try this 1st try remove this parts not solved 2nd try change now 100% working im tested many time and dont forget visit my blog.
GPGDragon Ver 3.37C Boom Boom Update many phone supported this version see and enjoy it.
work 100% done phone for error solution try this 1st try remove this parts not solved 2nd try change now 100% working im tested many time and dont forget visit my blog.
Nokia 2710NE Memory Card Solution MicroSD Card not detected problem repair solution
When the MicroSD card inserted on the device and nothing happens but it displays "memory card not inserted" something like that, this solution may help fix and repair the problem if the Nokia 2710 navigation edition has been damaged by any means like wet damaged or accidentally dropped.
The solution below shows the particular SMD components that needs to check, trace and replace to possibly fix the problem.
Repair tips:
1. Check the MMC card detection switch first, you can read a voltage on that area about 1.8 volts if unpressed and 0 volts if pressed.
2. Check and trace the MMC supply voltage it is marked with VSIOD and connected to MMC socket pin #4 then the pin #6 for groundings.
3. If both MMC power supply voltage and MMC detection switch is okay, the problem may lies on the ESD-EMI filter chip. Replace the ESD filter if necessarily.
The solution below shows the particular SMD components that needs to check, trace and replace to possibly fix the problem.
Nokia 2710ne MicroSD memory card problem solution

1. Check the MMC card detection switch first, you can read a voltage on that area about 1.8 volts if unpressed and 0 volts if pressed.
2. Check and trace the MMC supply voltage it is marked with VSIOD and connected to MMC socket pin #4 then the pin #6 for groundings.
3. If both MMC power supply voltage and MMC detection switch is okay, the problem may lies on the ESD-EMI filter chip. Replace the ESD filter if necessarily.
Monday, April 13, 2015
Nokia 2320 Classic Insert sim problem solution ways jumper
A zoom image is given with it and blue color lines show jumper ways.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia 5800 mic not working problem solution jumper ways
if mic is not working in Nokia 5800 our voice can not be reached to destination mobile during voice call and we can not record audio recording in it.to solve this mic problem in Nokia 5800 you can follow a few steps as given in post bellow.
Nokia 5230 mic not working problem solution jumper ways

in above diagram there are some different color lines which are to define tracks of mic and parts that are used in it.check these path with meter and if any of them is missing then apply jumpers as shown in above diagram.
if any part is missing or damage replace those parts with new that you can get from other mobile boards.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia 5230 mic not working problem solution jumper ways
in above diagram there are some different color lines which are to define tracks of mic and parts that are used in it.check these path with meter and if any of them is missing then apply jumpers as shown in above diagram.
if any part is missing or damage replace those parts with new that you can get from other mobile boards.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
You might also like:
Nokia X2 05 Speaker problem solution jumper ways
Nokia X2-05 speaker problem, Nokia X2-05 earpiece jumper ways, Nokia X2-05 mic is not working, Nokia X2-05 speaker jumpers, speaker is not working or low voice and noise.Nokia X2-02 Lcd Display Jumper Ways Problem Solution

If Nokia X2-05 speaker has low voice or nosie it can be problem of speaker ear piece. If no voice in it that may can be cause of missing or damage parts. The noise can also be due to water damages in Nokia X2-05.
If speaker is not working or have a low voice it can be fault of speaker and housing. Check Nokia X2-05 housing ( body ). All housing have a small whole at the point of ear piece. In some cases rust or dust cover this point and the voice can not reach proper to the mic point so make it clean if there is some dust on it.
After disassambly of Nokia X2-05 look at the motherboard for rust carbon or burren parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.
Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.
Check all these tracks that are provided in above diagram to solve speaker problem in Nokia X2-05. In diagram two different color lines are given to identify all parts that are used to solve Nokia X2-05 speaker problem with jumpers.
If some parts are missing or damage apply jumper on these points where small circles are pointing in nokia mic repairing diagram above.
If Nokia X2-05 speaker has low voice or nosie it can be problem of speaker ear piece. If no voice in it that may can be cause of missing or damage parts. The noise can also be due to water damages in Nokia X2-05.
If speaker is not working or have a low voice it can be fault of speaker and housing. Check Nokia X2-05 housing ( body ). All housing have a small whole at the point of ear piece. In some cases rust or dust cover this point and the voice can not reach proper to the mic point so make it clean if there is some dust on it.
After disassambly of Nokia X2-05 look at the motherboard for rust carbon or burren parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.
Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.
Check all these tracks that are provided in above diagram to solve speaker problem in Nokia X2-05. In diagram two different color lines are given to identify all parts that are used to solve Nokia X2-05 speaker problem with jumpers.
If some parts are missing or damage apply jumper on these points where small circles are pointing in nokia mic repairing diagram above.
Nokia Asha 300 Charging Problem Solution Jumpers Ways
In nokia asha 300 if it is not charging ok and you have not charging problem in nokia asha 300 then you can solve this problem with help of diagram bellow. in this diagram all charging links are identified so that you can understand which parts are used in charging function in nokia asha 300.Nokia E52 keypad light solution problem jumper ways

So one print is ground it is identified in diagram with blue color and red cooler is a positive print and you can check all track with meter and if any of them is broken you can apply jumper as defined in repairing diagram.mostly if we plug in charger and it does not show any thing it can be fault of charging base or may be fault of broken link. so check charging base also.
If it shows not charging indication or a message charger not supported then it can be fault of charging ic or may be due to 47k resistance. About these problems I will post in upcoming days.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
So one print is ground it is identified in diagram with blue color and red cooler is a positive print and you can check all track with meter and if any of them is broken you can apply jumper as defined in repairing diagram.mostly if we plug in charger and it does not show any thing it can be fault of charging base or may be fault of broken link. so check charging base also.
If it shows not charging indication or a message charger not supported then it can be fault of charging ic or may be due to 47k resistance. About these problems I will post in upcoming days.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Subscribe to:
Posts (Atom)