Showing posts with label jumpers. Show all posts
Showing posts with label jumpers. Show all posts
Friday, April 17, 2015
Nokia Asha 202 No Network Low Signal Problem Solution Jumpers
If nokia asha 202 drop call or do not make voice calls it can be fault of signals and not network access. Check if your mobile phone is in offline mode airo plan mode. And also check your mobile phone’s setting about network selection it is automatic or manual.
nokia c1-01 light problem solution jumpers Tested 100%
Replace the sim card and cehck it again. If all these tips can not work then dis assemble the nokia asha 202.Find out if there is carbon or water damages on the mother board. Clean the whole nokia asha 202 mother board and apply heat to make it dry with hot air.
Do not apply much heat it can damage the mother board or can burn components.In above diagram red line is networking track. All these components are used in signal function of nokia asha 202.
Check these path with meter and if any of them is missing apply jumpers as given in repairing diagram of nokia asha 202. This can be use for nokia asha 202 signal not network solution.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
nokia c1-01 light problem solution jumpers Tested 100%
Replace the sim card and cehck it again. If all these tips can not work then dis assemble the nokia asha 202.Find out if there is carbon or water damages on the mother board. Clean the whole nokia asha 202 mother board and apply heat to make it dry with hot air.
Do not apply much heat it can damage the mother board or can burn components.In above diagram red line is networking track. All these components are used in signal function of nokia asha 202.
Check these path with meter and if any of them is missing apply jumpers as given in repairing diagram of nokia asha 202. This can be use for nokia asha 202 signal not network solution.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Thursday, April 16, 2015
Nokia C2 05 display light solution jumpers repair solution
nokia c2-05 light problem , nokiac2-05light problem , nokia c2-05-2 light problem , nokiac2-05light problum, c2-05, nokia c2-05 light problem solution, nokia c2-05 light repair solution Nokia C2-07 Camera Standby Notworkin Problem Solution Jumper Ways
c2-05-2 light sollutin on gsm forum, nokia c2-05 light nokia c2-05 light carquet, nokia c2-05 light soi, nokia c2-05 laet, ways, nokia c2-05 liqht problem
c2-05-2 light sollutin on gsm forum, nokia c2-05 light nokia c2-05 light carquet, nokia c2-05 light soi, nokia c2-05 laet, ways, nokia c2-05 liqht problem
Wednesday, April 15, 2015
Nokia E52 Lcd display Solution White Blank Display Problem Jumpers
Nokia E52 Lcd problem solution, Nokia E52 Lcd White display, Nokia E52 blank display. All these problems can be solve by following a few steps that I am going to describe here in this Solution of Nokia E52.Look at diagram bellow.nokia Asha 202 light problem solution with jumpers
In above diagram you can see some red lines these lines are given to identify components that are used in Nokia E52 display and lcd functions.After dis assembly of Nokia E52 replace lcd panel with new on and check it may can be the fault of lcd.
If replacement of lcd can not solve the display problem in Nokia C5.You can clean mother board and specially these parts that are inline with red color. Because there may can be some rust carbon or water damages.
Dry the mother board with hot air.And re sold or re flow these parts that can solve Nokia E52 display problem. Nokia E52 display solution is also possible with replacement of these parts.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
In above diagram you can see some red lines these lines are given to identify components that are used in Nokia E52 display and lcd functions.After dis assembly of Nokia E52 replace lcd panel with new on and check it may can be the fault of lcd.
If replacement of lcd can not solve the display problem in Nokia C5.You can clean mother board and specially these parts that are inline with red color. Because there may can be some rust carbon or water damages.
Dry the mother board with hot air.And re sold or re flow these parts that can solve Nokia E52 display problem. Nokia E52 display solution is also possible with replacement of these parts.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Monday, April 13, 2015
Nokia Asha 300 Charging Problem Solution Jumpers Ways
In nokia asha 300 if it is not charging ok and you have not charging problem in nokia asha 300 then you can solve this problem with help of diagram bellow. in this diagram all charging links are identified so that you can understand which parts are used in charging function in nokia asha 300.Nokia E52 keypad light solution problem jumper ways
So one print is ground it is identified in diagram with blue color and red cooler is a positive print and you can check all track with meter and if any of them is broken you can apply jumper as defined in repairing diagram.mostly if we plug in charger and it does not show any thing it can be fault of charging base or may be fault of broken link. so check charging base also.
If it shows not charging indication or a message charger not supported then it can be fault of charging ic or may be due to 47k resistance. About these problems I will post in upcoming days.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
So one print is ground it is identified in diagram with blue color and red cooler is a positive print and you can check all track with meter and if any of them is broken you can apply jumper as defined in repairing diagram.mostly if we plug in charger and it does not show any thing it can be fault of charging base or may be fault of broken link. so check charging base also.
If it shows not charging indication or a message charger not supported then it can be fault of charging ic or may be due to 47k resistance. About these problems I will post in upcoming days.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Saturday, April 11, 2015
Nokia Asha 300 Keypad Not Working Problem Solution Jumpers
If any, all or a few keys not working in nokia asha 300 then this post will help you to solve all keypad not working problems easily and in a quick way. Simply look at diagram bellow and check all the track and links as shown in it.Nokia 2320 Classic Local Test Mode Problem Solution see All cellular mobile repair solution
Once you check with meter if any of them is broken make these jumpers and your problem will solve easily. All same color keys outer and inner are to define same link ways. If a single key is not working we can apply jumper form other key that have same color for outer or inner.
Some key are going to resistance and capacitors in diagram so we have to apply jumpers on those places and parts. In diagram above a few small diagrams have red border and these are zoom images of the board so that you can see parts vary clearly.
So zoom diagram are only to show close up of board. The diagram above also contain on off button ways in it.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Once you check with meter if any of them is broken make these jumpers and your problem will solve easily. All same color keys outer and inner are to define same link ways. If a single key is not working we can apply jumper form other key that have same color for outer or inner.
Some key are going to resistance and capacitors in diagram so we have to apply jumpers on those places and parts. In diagram above a few small diagrams have red border and these are zoom images of the board so that you can see parts vary clearly.
So zoom diagram are only to show close up of board. The diagram above also contain on off button ways in it.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia Asha 202 Touch Screen Solution Jumpers Problem Ways
Nokia asha 202 touch screen is not working we can not type with it.Although nokia asha 202 have also keypad but touch screen is easy to type fast. To solve touch screen problem of nokia asha I am posting this post that also have a diagram.nokia e52 100% tested fake charging solution
The above diagram contains some different color lines these are used for nokia asha 202 touchscreen function.You can find out if there is some rust carbon in it. Mother board can be water damage or may be you find out some burn parts in it.
In case of water damage clean the mother board and apply heat to make it dry. In case of burn or damage parts you can replace components.
Check all these tracks that are given in diagram for nokia asha 202 touchscreen problem solutions.Small circles in different colors are given so that you can find out points where you can apply jumpers and you can check these with meter.
If any link is broken apply jumpers to solve touch screen solution in nokia asha 202.
I all ready have posted an Nokia Asha 202 Touch screen IC problem solution you can check it also.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
The above diagram contains some different color lines these are used for nokia asha 202 touchscreen function.You can find out if there is some rust carbon in it. Mother board can be water damage or may be you find out some burn parts in it.
In case of water damage clean the mother board and apply heat to make it dry. In case of burn or damage parts you can replace components.
Check all these tracks that are given in diagram for nokia asha 202 touchscreen problem solutions.Small circles in different colors are given so that you can find out points where you can apply jumpers and you can check these with meter.
If any link is broken apply jumpers to solve touch screen solution in nokia asha 202.
I all ready have posted an Nokia Asha 202 Touch screen IC problem solution you can check it also.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Friday, April 10, 2015
Nokia 5250 Speaker Ere Peace Not Working Problem Solution Jumpers
Nokia 5250 cellphone Speaker Honorary Peace is not working Problem Solving Jumpers are available in this chart is posted in this post.some times we face the Nokia 5250 cellphone speaker problem in a low voice or no voice call works for some time, but speaker works not, while in other cases speaker works, but does not ring all these problems you should follow a few steps given below and the problem will be solved easily and quickly.Nokia x2 hand free open problem jumpers solution
In the first step, whether mobile phone volume up and not too low or the setting profile.then check speaker of Nokia 5250 with one meter and as do not show continuity to modify and replace it.If speaker shows the continuity check or those items that are defined in the cellphone diagram above. Check out these links and make these jumpers as one of them is missing.in diagram top left you a color chart to determine color scheme for the chart to see.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
In the first step, whether mobile phone volume up and not too low or the setting profile.then check speaker of Nokia 5250 with one meter and as do not show continuity to modify and replace it.If speaker shows the continuity check or those items that are defined in the cellphone diagram above. Check out these links and make these jumpers as one of them is missing.in diagram top left you a color chart to determine color scheme for the chart to see.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia Asha 300 Mic Not Working Problem Solution Jumpers
If you are facing mic problem low voice or not voice out going to destination then this diagram will help you to solve mice problem in nokia asha 300. In diagram bellow you can see a mic that is defined with red boarder and some parts are also defined with red line boarder.All cellular mobile repair solution here Nokia C2-01 Hand Free Problem Solution Jumper Ways So we have to check all these parts that are in red board to solve mic problem and mic not working problem in nokia asha 300.check mother board vary carefully if there is any rust carbon or water damage issue. Clean mother board form these areas and apply some heat with hot air so that mother board of nokia asha 300 can be dry.
If with only service it can not be solved change mic and you can remove mic with hot air or solding iron. In nokia asha 300 mic has 4 points itself and one is ground other are data clock points. so we can apply jumpers in these point.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Wednesday, April 8, 2015
Nokia Asha 200 Ringer Problem Solution Ways Jumpers
Nokia Asha 200 Have two ringer and both of these ringer are shown in diagram all track and paths for two ringers are defined with different colors so look at the diagram given bellow and make these jumpers as Nokia C2-07 MMC Memory Card Problem Solution Ways
shown in diagram they will help you to solve ringer not working low voice or ringer problems in Nokia Asha 200.some parts have single leg ground while other is used for ringer path so if any of them have ground we have to jumper on the other side of that resistance or capacitor.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
shown in diagram they will help you to solve ringer not working low voice or ringer problems in Nokia Asha 200.some parts have single leg ground while other is used for ringer path so if any of them have ground we have to jumper on the other side of that resistance or capacitor.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
Nokia C2 08 Voluem Up Down Keys Not Working Problem Solution Jumpers
1-Nokia C2-08 Volume Up Key is Not Working.
2-Nokia C2-08 Volume Down Key is Not Working.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Nokia C2-08 if a few parts are damage in this board.So that they can be replaced.
Nokia 105 Speker ok but no ringer working
Solution:-
If Volume Up or Down key is not working in Nokia C2-08 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.
2-Nokia C2-08 Volume Down Key is Not Working.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Nokia C2-08 if a few parts are damage in this board.So that they can be replaced.
Nokia 105 Speker ok but no ringer working
Solution:-
If Volume Up or Down key is not working in Nokia C2-08 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.
Tuesday, April 7, 2015
Nokia C2 03 Lcd Display Problem Solution Ways Jumpers
Nokia C2-03 Blank Lcd Display, Nokia C2-03 White Lcd Display, Nokia C2-03 Lcd Jack Damage Prints Missing.Nokia 5230 Not Charging solution no response problem solution
To solve lcd display problem in Nokia C2-03 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-03
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-03 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
To solve lcd display problem in Nokia C2-03 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-03
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-03 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia 5250 Bluetooth Problem Solution Ways Jumpers
this is diagram to show that which parts are used in blue tooth function in nokia 5250 .so check these parts that are encircled with red line Nokia 5230 Ringer Problem Solution jumpers 
and wash these with any electronics cleaner and apply a little heat with hot air or leave it to dry under electrical bulb for a few mints.it will become ok and blue tooth will become in working condition.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
Read more »
and wash these with any electronics cleaner and apply a little heat with hot air or leave it to dry under electrical bulb for a few mints.it will become ok and blue tooth will become in working condition.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
Monday, April 6, 2015
Nokia 5250 Speaker Ere Peace Not Working Problem Solution Jumpers
Nokia 5250 cellphone Speaker Honorary Peace is not working Problem Solving Jumpers are available in this chart is posted in this post.some times we face the Nokia 5250 cellphone speaker problem in a low voice or no voice call works for some time, but speaker works not, while in other cases speaker works, but does not ring all these problems you should follow a few steps given below and the problem will be solved easily and quickly.Nokia x2 hand free open problem jumpers solution
In the first step, whether mobile phone volume up and not too low or the setting profile.then check speaker of Nokia 5250 with one meter and as do not show continuity to modify and replace it.If speaker shows the continuity check or those items that are defined in the cellphone diagram above. Check out these links and make these jumpers as one of them is missing.in diagram top left you a color chart to determine color scheme for the chart to see.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
In the first step, whether mobile phone volume up and not too low or the setting profile.then check speaker of Nokia 5250 with one meter and as do not show continuity to modify and replace it.If speaker shows the continuity check or those items that are defined in the cellphone diagram above. Check out these links and make these jumpers as one of them is missing.in diagram top left you a color chart to determine color scheme for the chart to see.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Friday, April 3, 2015
Nokia 2320 Classic Camera Problem Solution Jumpers Ways
Nokia 2320 Classic you can not take pictures with Nokia 2320 Classic.Or it may can bluer your pictures.In starting diagnostics you can check camera settings in you phone and if there is not camera settings problem you can do a hardware check all cellular mobile repairing solution here Nokia 2320 Classic Auto Restart On Off Problem Solution
After disassemble of Nokia 2320 Classic you can check all these parts that are given in above diagram with red lines.So make them clean if there is some rust or carbon parts.Apply heat with hot air and keep in mind do not apply much heat it can harm your skin and damage mother board also.
Re flow these parts and with resol ding the camera can be in normal condition.Check resistant with meter if they do not shows good value you can apply jumpers also.Replace Camera in last stage if above tips do notwork.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
After disassemble of Nokia 2320 Classic you can check all these parts that are given in above diagram with red lines.So make them clean if there is some rust or carbon parts.Apply heat with hot air and keep in mind do not apply much heat it can harm your skin and damage mother board also.
Re flow these parts and with resol ding the camera can be in normal condition.Check resistant with meter if they do not shows good value you can apply jumpers also.Replace Camera in last stage if above tips do notwork.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia E52 Camera Jumpers Solution
Nokia E52 camera jumpers are given in this post and a repairing diagram is also attached with this post.Nokia e52 camera repairing diagram contains some red color lines that are given to find parts which used in camera function of nokia e52.nokia C5 test mode local mode problem solution ways
Once you have dis assemble the mobile phone find out if there is some rust carbon or burn parts. If you find some burn or damage parts then replace these components to repair nokia e52 camera problem.
You can apply jumper as given in above diagram for solving camera problem in nokia e52.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
Once you have dis assemble the mobile phone find out if there is some rust carbon or burn parts. If you find some burn or damage parts then replace these components to repair nokia e52 camera problem.
You can apply jumper as given in above diagram for solving camera problem in nokia e52.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Thursday, April 2, 2015
Nokia C2 03 Voluem Up Down Keys Not Working Problem Solution Jumpers
1-Nokia C2-03 Volume Up Key is Not Working.
2-Nokia C2-03 Volume Down Key is Not Working.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Nokia C2-03 if a few parts are damage in this board.So that they can be replaced.Nokia 5800 earpiece speaker problem solution tested
Solution:-
If Volume Up or Down key is not working in Nokia C2-03 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.
Read more »
2-Nokia C2-03 Volume Down Key is Not Working.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Nokia C2-03 if a few parts are damage in this board.So that they can be replaced.Nokia 5800 earpiece speaker problem solution tested
Solution:-
If Volume Up or Down key is not working in Nokia C2-03 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.
Wednesday, April 1, 2015
Nokia 5250 Charging Problem Solution Jumpers Ways
nokia 5250 if it is not charging ok and you have not charging problem in nokia 5250 then you can solve this problem with help of diagram bellow. in this diagram all charging links are identified so that you can understand which parts are used in charging function in nokia 5250.Nokia 2323 Classic Hang problem solution
So one print is ground it is identified in diagram with blue color and red cooler is a positive print and you can check all track with meter and if any of them is broken you can apply jumper as defined in repairing diagram.mostly if we plug in charger and it does not show any thing it can be fault of charging base or may be fault of broken link. so check charging base also.
If it shows not charging indication or a message charger not supported then it can be fault of charging ic or may be due to 47k resistance. About these problems I will post in upcoming days.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
So one print is ground it is identified in diagram with blue color and red cooler is a positive print and you can check all track with meter and if any of them is broken you can apply jumper as defined in repairing diagram.mostly if we plug in charger and it does not show any thing it can be fault of charging base or may be fault of broken link. so check charging base also.
If it shows not charging indication or a message charger not supported then it can be fault of charging ic or may be due to 47k resistance. About these problems I will post in upcoming days.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Nokia C2 08 Insert sim ways problem solution jumpers
Nokia C2-08 insert sim problem, Sim is not working in Nokia C2-08, Sim is not Valid, Single Sim is not working in Nokia C2-08
Tools:-
Nokia T4 and T5 key, Electronic meter, Electronics Cleaner, Hot Air, Solding Iron, Jumper Wire.
Nokia Asha 201 Ringer Speaker Problem Solution Ways Jumpers
Diagnostic and Solutions.
if sim is not working in Nokia C2-08 is can be cause of water damage or missing components. Use different sim and if sim is not working then de assemble Nokia C2-08.
Once Mobile phone is disassemble check all these parts that are given in above diagram and apply electronics cleaner. Apply hot air so that it can be dry but not to much because it can damage the mother board or may can harm your skin.
these different color lines are indicating different path and tracks that are used in sim function in Nokia C2-08 so if nay of them is missing apply that jumper as shown in diagram to solve insert sim problem in Nokia C2-08
If single sim is not working out of these two you can only jumper those parts that are used by it. And to find prints and track you can see above diagram.
Warnings:
Do not apply to much heat it can damage the mother board and harm your skin.
When apply jumpers make sure the do not be ground with other prints.It can short the mobile phone.
Remove Sim Ic with hot air because with Solding iron it might can damage prints also.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Tools:-
Nokia T4 and T5 key, Electronic meter, Electronics Cleaner, Hot Air, Solding Iron, Jumper Wire.
Nokia Asha 201 Ringer Speaker Problem Solution Ways Jumpers
Diagnostic and Solutions.
if sim is not working in Nokia C2-08 is can be cause of water damage or missing components. Use different sim and if sim is not working then de assemble Nokia C2-08.
Once Mobile phone is disassemble check all these parts that are given in above diagram and apply electronics cleaner. Apply hot air so that it can be dry but not to much because it can damage the mother board or may can harm your skin.
these different color lines are indicating different path and tracks that are used in sim function in Nokia C2-08 so if nay of them is missing apply that jumper as shown in diagram to solve insert sim problem in Nokia C2-08
If single sim is not working out of these two you can only jumper those parts that are used by it. And to find prints and track you can see above diagram.
Warnings:
Do not apply to much heat it can damage the mother board and harm your skin.
When apply jumpers make sure the do not be ground with other prints.It can short the mobile phone.
Remove Sim Ic with hot air because with Solding iron it might can damage prints also.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Tuesday, March 31, 2015
Nokia 111 LCD Display Problem Ways Jumpers
Nokia 111 display problem can be cause of white or blank LCD display.it can be due to water damages or carbon rust.so if you want to solve lcd display problem in nokia 111 look at diagram bellow and follow these simple steps.there are a few different color lines that describe tracks of lcd ways.Nokia C2-03 Insert sim ways problem solution jumper
remove lcd and clean points on board with electronics cleaner.Clean also resistance and parts as shown in above diagram.try to re sold this lcd and if display can not be in original condition replace it with new LCD.
you can check all these tracks with multi meter and if any of them is not working or missing apply these jumpers.print number 10 and 11 are used for light function so if lcd light is not working or is blank then check these two prints.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
remove lcd and clean points on board with electronics cleaner.Clean also resistance and parts as shown in above diagram.try to re sold this lcd and if display can not be in original condition replace it with new LCD.
you can check all these tracks with multi meter and if any of them is not working or missing apply these jumpers.print number 10 and 11 are used for light function so if lcd light is not working or is blank then check these two prints.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Subscribe to:
Posts (Atom)