Showing posts with label voluem. Show all posts
Showing posts with label voluem. Show all posts
Friday, April 17, 2015
Nokia C5 06 Voluem Keypad Lock keys not working Solution
If keypad lock key or volume keys are not working in Nokia C5-06 It can be cause or key damages or water damages in the mobile phone.If smartphone keys are not working you can do these steps that are given in this post and diagram bellow.nokia Asha 202 Mic problem solution jumper ways
After dis assemble of Nokia C5-06 look at mother board and If you found some rust carbon or water damages then it can also be cause of Nokia C5-06 keys problem to solve and fix keys problem in Nokia C5-06 clean all the rust and carbon with electronics cleaner and apply hot air to make it dry.
In above diagram you can see some different color lines. These lines are tracks and paths of keys button switch that are used for keypad lock and voluem of keys button switch.
Check all these tracks with meter and apply jumpers. If these key switches are not working then you can replace voluem and keypad lock buttons.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Read more »
After dis assemble of Nokia C5-06 look at mother board and If you found some rust carbon or water damages then it can also be cause of Nokia C5-06 keys problem to solve and fix keys problem in Nokia C5-06 clean all the rust and carbon with electronics cleaner and apply hot air to make it dry.
In above diagram you can see some different color lines. These lines are tracks and paths of keys button switch that are used for keypad lock and voluem of keys button switch.
Check all these tracks with meter and apply jumpers. If these key switches are not working then you can replace voluem and keypad lock buttons.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Wednesday, April 8, 2015
Nokia C2 08 Voluem Up Down Keys Not Working Problem Solution Jumpers
1-Nokia C2-08 Volume Up Key is Not Working.
2-Nokia C2-08 Volume Down Key is Not Working.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Nokia C2-08 if a few parts are damage in this board.So that they can be replaced.
Nokia 105 Speker ok but no ringer working
Solution:-
If Volume Up or Down key is not working in Nokia C2-08 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.
2-Nokia C2-08 Volume Down Key is Not Working.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Nokia C2-08 if a few parts are damage in this board.So that they can be replaced.
Nokia 105 Speker ok but no ringer working
Solution:-
If Volume Up or Down key is not working in Nokia C2-08 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.
Thursday, April 2, 2015
Nokia C2 03 Voluem Up Down Keys Not Working Problem Solution Jumpers
1-Nokia C2-03 Volume Up Key is Not Working.
2-Nokia C2-03 Volume Down Key is Not Working.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Nokia C2-03 if a few parts are damage in this board.So that they can be replaced.Nokia 5800 earpiece speaker problem solution tested
Solution:-
If Volume Up or Down key is not working in Nokia C2-03 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.
Read more »
2-Nokia C2-03 Volume Down Key is Not Working.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Nokia C2-03 if a few parts are damage in this board.So that they can be replaced.Nokia 5800 earpiece speaker problem solution tested
Solution:-
If Volume Up or Down key is not working in Nokia C2-03 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.
Subscribe to:
Posts (Atom)