Get Data

This solution covers and may possibly help solved Nokia X6 Ringer and and Hands free loud speaker No sounds can be heard. You may need to ensure that the loud speakers is working well before applying this solution.





In Nokia X6 the handsfree speaker came with two channel the left and the right channel or so called stereo type. The audio signal is feeds from the power and audio chip (AVILMAS) and feeds to a audio amplifier IC to boost and amplify the sounds intensity.
You may need to check, trace, replace and rework those corresponding components indicated on the solution picture above.

if having tried to fix Nokia X6 Earpiece Speaker Problem that No Audio sound output can be heard and you already check  speaker is okay and also already  tried replacing the Flex cable wire but he problem unsolved. This solution might possibly help to solved the problem.



If the earpiece speaker and flex cable wire is working okay, those particular components highlighted on the solution might causes the problem if the device is severely damaged by any means of liquid or water damaged. Start to check on the flex pin connector and way down toall corresponding components composed of filter coil and bypass ESD resistor, replace at once if found open or shorted. If the filter coils were okay you may need to rework the power and audio IC (AVILMAS) trace the line paths first while the IC is being removed, then reball the IC, clean the solder balls surface and inplaced it back again.

If the Send, E60 and End key button keys failed to respond on Nokia X6, and you already tried to restore, reset, flash and update the device firmware but nothing happens.
Keypad keys malfunction on Nokia X6 may also possibly caused by a faulty keypad flex, cleaning or by replacing it will help solved the problem.




If after replacing and ensuring that the flex is okay but the keys still unresponsive, you may then consider that the problem lies on a faulty keypad circuits  hardware components on the PCB board. This solution below will tell us which components holds and controls the keypad keys to function or work.

Check the keypad pin connector first ensure that it is free from dirt and oxidation.
From the keypad pin connector there are three line filter coils located near to it, have a check on this components and replace if found damaged.
From the keypad filter coils the lines is feeds to a keypad filtering chip or keypad IC, you may then check this chip, trace its line paths and replace if found damaged.
The I/0 Expander Chip is the keypad controller components, which holds and control the keypads including the Touch Control Module. You may also rework or replace this chip for further harder keypad problem repair on Nokia X6.