Get Data

Samsung Galaxy Note 2 GT-N7100- How to Install N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware,N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Samsung Galaxy Note 2 GT-N7100 users can update their device with the UBDMH1 Android 4.1.2 Jelly Bean official firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is N7100UBDMH1. The Galaxy Note 2 N7100 receiving Android 4.1.2 Jelly Bean from February 2013 and here we have the latest 4.1.2 firmware for the device. If you yet to update your device to this latest firmware then update the same using our simple tutorial below. The below guide will help you to download and install the N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

Root N7100UBDMH1

If your Galaxy Note 2 N7100 already running on Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest update.

So, want to update your Galaxy Note 2 N7100 to the latest UBDMH1 Android 4.1.2 Jelly Bean firmware? For official way, either you can go for OTA update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 UBDMH1 firmware on your Galaxy Note 2 N7100 through Odin.

Android 4.1.2 Jelly Bean N7100UBDMH1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 2 GT-N7100 model.
Argentina (Movistar): N7100UBDMH1_N7100TFGDMH1_UFN.zip
Argentina: N7100UBDMH1_N7100UWMDMH1_TGP.zip
Uruguay: N7100UBDMH1_N7100UUBDMH2_UPO.zip
Argentina (Personal): N7100UBDMH1_N7100PSNDMH2_PSN.zip
Dominican Republic (Orange): N7100UBDMH1_N7100DORDMH1_DOR.zip
Android official firmware here see all update model
[Firmware for rest of the countries and carrier will be added here when available]
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 N7100UBDMH1 official firmware on Galaxy Note 2 N7100.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Note 2 N7100 through Odin:

1. Download Android 4.1.2 UBDMH1 Firmware for Galaxy Note 2 N7100 from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Note 2 N7100 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 2 N7100 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7100XXDLJ5_N7100ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Samsung Galaxy S3 GT-I9300- How to Install I9300UBUGML2 Android 4.3 Jelly Bean Firmware,I9300UBUGML2 Android 4.3 Jelly Bean Firmware Last Updated on 25-Feb-2014. You can now update the latest UBUGML2 4.3 Jelly Bean official firmware on Samsung Galaxy S3 GT-I9300 Smartphone. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is I9300UBUGML2. However, the firmware is currently out for Mexico. Hope the firmware will hit other part of the world soon. The Galaxy S3 I9300 recently started receiving  Android 4.3 Jelly Bean firmware after a long wait. Samsung already released many regular firmware update till now and here we have the latest available firmware for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below step by step guide will help you to download and flash the latest I9300UBUGML2 Android 4.3 Jelly Bean Firmware manually through Odin.

Root I9300UBUGML2

The latest Android 4.3 Jelly Bean official firmware is definitely a great update for the Galaxy S3 users as the device has been on Android 4.1.2 Jelly Bean from a long time. The latest firmware will upgrade the android version as well as will activate many new features, changes and improvements. Check out some of the new features and changes that coming with this latest update from below.

New features and changes in Android 4.3 Jelly Bean:

Galaxy S4 like lockscreen, Multi-pages feature on lockscreen, support widget on lockscreen, Tabbed UI in Settings, Daydream feature, Voice control feature for apps like phone, camera, music player and so on, Hands-free Mode, New Notification Panel with 2 pages, ANT+ support, TRIM support, Camera Improvements, Move apps to SD feature, New Samsung keyboard, Changed icons for some Samsung apps, Smoother TouchWiz, Adapt display, Adapt sound, New S-Voice from Galaxy S4, Full screen mode in Samsung apps and many more.

So, want to update your Galaxy S3 I9300 to the latest UBUGML2 Android 4.3 Jelly Bean firmware? For official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 UBUGML2 firmware on your Galaxy S3 I9300 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy S3 GT-I9300 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.3 Jelly Bean I9300UBUGML2 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S3 GT-I9300 model.
Mexico: I9300UBUGML2_I9300UVYUGML2_IUS.zip
[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Samsung Galaxy Grand 2 Duos SM-G7102- How to Install G7102XXUANB2 Android 4.3 Jelly Bean Firmware
Samsung Galaxy Trend Plus GT-S7580- How to Install S7580XXUBNA4 Android 4.2.2 Jelly Bean Firmware
Samsung Galaxy Grand Neo GT-I9168- How to Install I9168ZMUANB2 Android 4.2.2 Jelly Bean Firmware
Samsung GT-I9500 India INU- Android 4.4.2 Official Firmware Update guide

Pre-Requisites:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 I9300UBUGML2 official firmware on Galaxy S3 I9300.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy S3 I9300 through Odin:

1. Download Android 4.3 UBUGML2 Firmware for Galaxy S3 I9300 from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy S3 I9300 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy S3 I9300 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9300XXDLJ5_I9300ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

So, you have just finished the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy S3 GT-I9300. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.3 Jelly Bean build version UBUGML2. You can verify the firmware update details from Settings-About Phone. So, enjoy all the new features and improvements on your device and don’t forget to share your experience in the comment below.

Samsung Galaxy Grand Lite GT-I9060- How to Install I9060ZSUANB2 Android 4.2.2 Jelly Bean Firmware,I9060ZSUANB2 Android 4.2.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. You can now update the ZSUANB2 4.2.2 Jelly Bean official firmware on Samsung Galaxy Grand Lite GT-I9060 (Also known as Galaxy Grand Neo). Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is I9060ZSUANB2. However, the firmware is currently out for Hong Kong. Hope the firmware will hit other part of the world soon. The Galaxy Grand Lite recently announced by Samsung and already received many official firmware update. Here we have the latest available firmware for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the latest I9060ZSUANB2 Android 4.2.2 Jelly Bean Firmware manually through Odin.

Samsung Galaxy Note 3 Neo LTE SM-N7505L- How to Install N7505LUBUANB1 Android 4.3 Jelly Bean Firmware,N7505LUBUANB1 Android 4.3 Jelly Bean Firmware Last Updated on 25-Feb-2014. You can now update the UBUANB1 4.3 Jelly Bean official firmware on Samsung Galaxy Note 3 Neo SM-N7505L. Samsung recently started rolling out an OTA update about the firmware. The Galaxy Note 3 Neo N7505L recently released by Samsung with Android 4.3 Jelly Bean out of the box and this is the first official firmware update for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below step by step guide will help you to download and flash the latest N7505LUBUANB1 Android 4.3 Jelly Bean Firmware manually through Odin.
As the Galaxy Note 3 Neo N7505L already running on Android 4.3 Jelly Bean, you can expect few bug fixes and performance enhancement with this latest firmware update.

So, want to update your Galaxy Note 3 Neo N7505L to the latest UBUANB1 Android 4.3 Jelly Bean firmware? For official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 UBUANB1 firmware on your Galaxy Note 3 Neo N7505L through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Note 3 Neo SM-N7505L model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.3 Jelly Bean N7505LUBUANB1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 3 Neo SM-N7505L model.
Peru: PET-N7505LUBUANB1-20140225213115.zip
Dominican Republic (Claro): CDR-N7505LUBUANB1-20140225213023.zip
[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 N7505LUBUANB1 official firmware on Galaxy Note 3 Neo N7505L.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:

1. Download Android 4.3 UBUANB1 Firmware for Galaxy Note 3 Neo N7505L from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Note 3 Neo N7505L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 3 Neo N7505L to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7505LXXDLJ5_N7505LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

So, you have just finished the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy Note 3 Neo SM-N7505L. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.3 Jelly Bean build version UBUANB1. You can verify the firmware update details from Settings-About Phone. So, enjoy all the new features and improvements on your device and don’t forget to share your experience in the comment below.